Catégorie
- Atelier de structure métallique
- Poulailler à structure métallique
- Structure d'acier
- Entrepôt de structure en acier
- Bâtiment à structure métallique
- Maison préfabriquée
- Maison Conteneur
- Poulailler
- Panneau sandwich
- Poulailler à structure en acier
- Matériau de structure en acier
- Poulailler
- Panneau sandwich
- Maison de conteneur d'expédition
- Maison de conteneur modulaire
- Maison préfabriquée
Matériau de construction préfabriqué de structure métallique de cadre en acier de tôle de toit de maison
Le bâtiment de hangar à structure en acier préfabriqué à deux étages peut être utilisé pour l'entrepôt et l'atelier, la
Informations de base
Modèle NON. | LXB-231 |
Type d'acier pour la structure du bâtiment | Acier à haute résistance |
Acier de construction au carbone | Q345 |
Structure murale résidentielle | Support mural |
Application | Atelier d'Acier , Plate-Forme de Structure d'Acier , Maison d'Acier , Toiture Structurale , Élément de Châssis , Passerelle et Plancher d'Acier , Pont de Structure d'Acier |
Grue | Avec ou Sans (1 à 250 Tonnes) |
Panneau de toit et de mur | EPS/laine de roche/polyuréthane/MGO/panneau de mousse de ciment |
Gouttière | Tôle d'acier de couleur, acier galvanisé, acier inoxydable |
Porte | Porte coulissante, porte roulante, porte en acier, etc. |
Portée | 10 à 120m |
Sol | Panneau de béton ou de ciment ou contreplaqué |
Vitesse du vent | 0 à 360km/h |
Forfait transport | En état de naviguer |
spécification | Par personnalisé |
Origine | Foshan, Guangdong, Chine. |
Code SH | 94060000 |
Capacité de production | 5000 tonnes/mois |
Description du produit
Le bâtiment de hangar à structure en acier préfabriqué à deux étages peut être utilisé pour l'entrepôt et l'atelier, la charge vive et la charge morte peuvent suivre les exigences du client pour concevoir et calculer. Nous fournissons un service gratuit pour l'installation de formation en Chine, et afin de satisfaire les exigences des clients pour une installation rapide, nous pouvons envoyer un ingénieur sur le site du projet pour l'installation du guide. Le bâtiment à structure en acier est un type de maison préfabriquée, à la fois l'ensemble du cadre en acier et les matériaux de construction du revêtement sont tous de finition, y compris la coupe, le forage, la mise en forme, l'assemblage, le soudage, la résistance à la rouille, la peinture et l'emballage. Tous les éléments en acier sont reliés par boulon ou vis ou goupille, etc. Installation rapide et écologique.Steel warehouse building is one kind of steel structure. Steel structure project is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence, multi-layered high building and so on.STEEL STRUCTURE MEMBERS PRODUCTION (Fabrication) PROCESS :1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )Please check the details drawings as follow :Our strong points(advantages) :1. Sand blast: The sand blast effect reach 2.5 high grade,many countries with high standard requirements accept 2.5 grade.2. Welding: Our welders are full of experiences,professional in butt weld,fillet weld,intermittent welding etc.The welding lines are straight,orderly and nice.3. Painting: We use hight pressure airless spraying machine for painting,both the color and the thickness of paint are well-proportioned.4. Packing: (1) Open top container(advantage:easy to load the steel;disadvantage:high shipping cost,aleak and few quantity); (2) Closed container with steel skid (advantage:save shipping cost,all members be packed together and reduce friction,the surface of steel members will be much better;save labor cost to unload the steel members).